Although we all know how to use drive-in racks to help companies improve economic efficiency, it is not enough to pay attention to this point. What we need to pay attention to is how to better use drive-in racks to maximize economic benefits.
To better use the through-type racking, it should be noted that when designing a new warehouse or transforming an existing warehouse, then the system characteristics applied in the warehouse must be reviewed and researched. For example, the drive-in racking can be used in To achieve the largest storage capacity in the smallest space, then you can choose this economical logistics solution.
When using through-type shelves, load and unload from one side, which can effectively improve time efficiency.
The through-type rack is a continuous whole rack that is not divided by aisles. On the support rails (corbel beams), the trays are stored in the depth direction, one by one next to each other, which makes high-density storage possible. Drive-in racks are suitable for the storage of small varieties and large quantities of goods. They are often used to store large quantities of goods of the same type. They have a high utilization of space. They are suitable for occasions with high storage space costs such as the food industry, chemical industry, clothing industry, and cold storage. , The storage cost per unit site is relatively low.
Through-type racks can be divided into one-way and two-way arrangements according to the pick-up direction. The total depth of the one-way (wall area) shelf is preferably controlled within the depth of 6 pallets, and the total depth of the two-way (the middle area can be picked up on both sides) is the largest. It is well controlled within the depth of 12 pallets to improve the efficiency and reliability of forklift access (in this type of racking system, the forklift is a continuous "lifting high" operation method, and the forklift is easy to shake and hit the shelf, so stability is considered Adequacy is crucial). The stability of this kind of storage system is weak, the shelf should not be too high, usually should be controlled within 10 meters, and in order to strengthen the stability of the entire shelf system, in addition to the larger specifications and selections, a tensioning device must be added. The single pallet should not be too large or heavy, usually the weight is controlled within 1500KG, and the pallet span should not be greater than 1.5 meters. Commonly equipped forklifts are forward-moving battery forklifts or counterbalanced battery forklifts.
