Through-type racks are also called corridor racks or drive-in racks. The through-type racks can be used for forklifts (or unmanned trucks with forks) to enter the channel to access the goods, which is suitable for the storage of small types and large batches of goods. Except for the cargo space near the aisle, the through-type racking needs to enter the rack to access the goods. Usually, it is recommended that the single-sided pick-up does not exceed the depth of 7 cargo spaces. In order to increase the operating speed of forklifts, guide rails can be selected according to actual needs. Compared with beam racks, the storage space utilization rate of through-type racks (drive-in racks) can be increased by more than 30%. ) Widely used in wholesale, cold storage, food and tobacco industries.
1. On the support rails, the trays are stored in the depth direction, one after the other, which makes high-density storage possible.
2. The goods are accessed and retrieved from the same side of the shelf. The goods are stored first and then retrieved. The counterweight and forward-moving forklift can easily drive into the middle of the rack to retrieve and retrieve the goods without occupying multiple aisles.
3. This kind of shelf is suitable for storing large-volume, small-variety items. The corbel and corbel shelf of the through-type shelf (drive-in shelf) adopt integral stamping/rolling technology, which has strong carrying capacity and beautiful appearance. .
4 Through-type racks are fully pluggable and assembled structure, the column pieces are assembled structure, the total depth of the shelves near the wall is generally best to be controlled within the depth of 5 pallets, and the total depth of the shelves that can enter and exit on both sides of the middle area is generally best to be controlled within Within 10 pallets to improve the efficiency and reliability of forklift access.
The stability of the through-type racking system is the weaker among all types of racks. For this reason, the racks should not be too high, generally within 10m. In addition, the system needs to be equipped with a tensioning device. This kind of system has densely arranged shelves and extremely high space utilization rate. It is suitable for storing a small variety of large quantities of the same type of goods. The goods can be stored and taken out from the same side, or stored in one side and taken out from the other side.
